Ceel-Co® PVC Installation Accessories
Ceel-Co® PVC installation accessories offer outstanding compatibility and performance in the systems for which they are designed. When used in conjunction with the various Ceel-Co products, they complete a systems package which features ease of installation, uniform appearance, and optimum, long-term insulation and protection.
A complete Ceel-Co system, using components and accessories which are fully integrated, will give you an easy-to-install, professional job which offers peak performance in a neat, uniform installation.
Ceel-Tite® solvent welding system adhesive
Ceel-Tite solvent welding system adhesive is applied with a standard applicator gun and forms a permanent chemical bond between the PVC members. It takes an initial set in 10 minutes with complete adhesive curing in 8 to 10 hours. Ceel-Tite adhesive can be used on 20 and 30 mil (0.5 and 0.8 mm) jacketing and most Ceel-Co 550/300 PVC insulated fitting covers where a totally sealed system is required, such as in the USDA market. Ceel-Tite adhesive is available in one quart (0.95 liter) and one gallon (3.8 liter) containers.
Note: It is recommended that Ceel-Tite adhesive be applied at temperatures above 40°F (4°C).
Ceel-Tite adhesive applicator
Pump-type gun for application of Ceel-Tite adhesive. Holds 6 ounces (177 ml).
Ceel-Tite® Thinner
Ceel-Tite Thinner is used primarily for clean-up or removal of Ceel-Tite Adhesive from applicator guns and equipment. Available in single gallon (3.8 liter) containers or packed six quarts (0.95 liters/container) per case, it should be used sparingly to thin adhesive if necessary.
PVC Z-Tape
Z-Tape was developed to provide excellent adhesion, even when applied during cold or humid weather. It is flexible polyvinyl chloride film, coated with a specially formulated adhesive. Z-Tape is available in thicknesses of 5 mils (0.13 mm) and 10 mils (0.25 mm) and can be applied indoors and outdoors* at temperatures as low as 40°F (4°C) to achieve a strong, permanent bond. It has an effective installed temperature range of 0°F to +150°F (-18°C to +66°C). Z-Tape has excellent resistance to chemicals, acids, alkali, oils, greases, bacteria, and fungus. It can bridge gaps and cover almost any contour or shape for a complete seal.
