JM TPO Peel & Stick Perimeter Reinforcement System
JM TPO Peel & Stick 10" RPS
JM TPO 10" RPS (Reinforced Perimeter Strip) is a 10" (254 mm) wide, 45 mil (1.14 mm) TPO membrane strip with a 3" (76 mm) factory-laminated tape along each edge. Use in lieu of half sheets to secure the roof membrane attachment beneath the TPO membrane and as additional membrane securement as specified in Johns Manville specifications and details. Also consider using with the JM TPO Peel & Stick 6" RTS (Reinforced Termination Strip) as part of a comprehensive peel & stick perimeter reinforcement system.
JM TPO Peel & Stick 6" RTS
JM TPO Peel & Stick RTS (Reinforced Termination Strip) is a 6" wide (15.24 cm), 45 mil (1.14 mm) TPO membrane strip with a 3" (7.62 cm) tape factory laminated along one edge. Use to secure the field membrane at any angle change greater than 2 in./ft (166.56 mm/m) in lieu of fastening through the field membrane with screws and plates at the angle changes.
The use of this system is at the discretion and approval of JM. This system is not recommended for use in high wind zones.
Data Sheets & MSDSs
