JM Cool Roofs Lower Energy Costs

With greater reflectivity and emissivity—they reduce building heat gain—meaning you need less cooling to keep the people inside comfortable and productive.
Home » Sustainable Building  »  LEED Program Information  »  Energy & Atmosphere

Energy & Atmosphere

We are experts in making products that optimize energy efficiency. Look to JM for a wide variety of roofing system, building insulation and mechanical insulation products that will contribute to LEED® Energy and Atmosphere points.


PDF icon

JM Product Description & LEED® Credit Opportunity Brochure*

Download an easy-to-carry reference guide of LEED® Credit availability for all qualifying JM products.
*Newly Updated for LEED® for Schools.
Download Now
(1138Kb .pdf)
How do I document the improved energy efficiency of added mechanical insulation?

Exceeding code requirements for mechanical insulations can significantly improve the energy efficiency of buildings. To demonstrate the benefits of added mechanical insulation during LEED certification, you can supplement the Whole Building Energy Simulation with other modeling, like 3E Plus® from the North American Insulation Manufacturers Association.

How do I promote energy efficiency in my building and systems?

Maximizing the R-values of your building insulation, roofing system and mechanical insulation is one of the most cost-effective ways to optimize your building’s energy performance.

LEED® Energy and Atmosphere Requirements

EA Prerequisite 2:
Minimum Energy Performance
Required

Intent:
Establish the minimum level of energy efficiency for the proposed building and systems.

Requirements:
Design the building project to comply with both:
  • The mandatory provisions of ASHRAE/IESNA Standard 90.1-2004 without amendments); and
  • The prescriptive requirements or performance requirements of ASHRAE/IESNA Standard 90.1-2004 (without amendments).
EA Credit 1:
Optimize Energy Performance
1 - 10 Points

Intent:
Achieve increasing levels of energy performance above the baseline in the prerequisite standard to reduce environmental and economic impacts associated with excessive energy use.

Requirements:
OPTION 1 - Whole Building Energy Simulation (1-10 Points)
OPTION 2 - Comply with ASHRAE Advanced Energy Design Guide for Small Office Buildings 2004 (4 Points)
OPTION 3 - Comply with the required sections of the Basic Criteria and Prescriptive Measures of the Advanced Building Benchmark v1.1 (1 Point)

JM Products That Help You Earn Energy & Atmosphere Credits

Using JM products that contribute to a reduced energy load for indoor HVAC equipment can help satisfy Energy and Atmosphere Prerequisite 2 Minimum Energy Performance and help earn EAc1 Optimize Energy Performance.

Mechanical Insulation
Pipe, Tank and Equipment Insulation
Micro-Flex® Large Diameter Pipe & Tank Insulation
Micro-Lok® HP Pipe Insulation
Micro-Lok® Pipe Insulation
Spin-Glas® 800 Series Duct & Equipment Insulation
Spin-Glas® 1000 Series High Temperature Equipment Insulation
Insulation for Rectangular Steel Ducts
Linacoustic™ RC Duct Liner
Linacoustic™ R-300 Rigid Duct Liner
LinaTex™ Duct Liner
Microlite® Duct Wrap
Microlite® XG™ Duct Wrap
JM Formaldehyde-free™
Spin-Glas® 800 Series Duct Wrap
Insulation for Round and Spiral Steel Ducts
Microlite® Duct Wrap
Microlite® XG™ Duct Wrap
JM Formaldehyde-free™
Spiracoustic® Plus Duct Liner
Self-insulated Duct Products
EnviroAire® Duct Board
JM Formaldehyde-free™
Mat-Faced Micro-Aired® Duct Board
SuperDuct® Duct Board
JM Formaldehyde-free™JM Formaldehyde-free™ products


Building Insulation
Batt and Roll Insulation
ComfortTherm® Plastic-wrapped Fiber Glass Insulation Batts and Rolls
JM Formaldehyde-free™
Foil-Faced Fiber Glass Insulation Batts
JM Formaldehyde-free™
FSK-25 Faced Fiber Glass Insulation Batts
JM Formaldehyde-free™
Kraft-Faced Fiber Glass Insulation Batts and Rolls
JM Formaldehyde-free™
MR® Faced Mold- and Mildew-resistant Fiber Glass Insulation Batts
JM Formaldehyde-free™
Panel Deck FSK-25 & PSK Faced Fiber Glass Insulation Batts
JM Formaldehyde-free™
Unfaced Fiber Glass Insulation Batts and Rolls
JM Formaldehyde-free™
Blow-in and Spray-in Insulation
Climate Pro® Loose Fill Fiber Glass Insulation
JM Formaldehyde-free™
JM Spider™ Spray-in Custom Fiber Glass Insulation and Delivery System
JM Formaldehyde-free™
Rigid and Semi-rigid Boards and Rolls
Insul-SHIELD ® FSK-25 & PSK Panel Boards
Insul-SHIELD ™ Unfaced Boards
JM Formaldehyde-free™JM Formaldehyde-free™ products


Roofing System Products
Roof Membranes
GlasKap® CR
JM PVC 50, 60, 80 mil
JM PVC Fleece-Backed 50 and 60 mil Single-Ply Systems
JM TPO 45, 60,72 and 80 mil
TopGard® 4000
TopGard® 5000
Roof Insulations and Cover Boards
½" Retro-Fit™ Board
DuraBoard™ Cover Board
ENRGY 3® (ENRGY 3® Foil Face Roof Insulation, ENRGY 3® Roof Insulation, ENRGY 3® Plus Roof Insulation or ENRGY 3® 25 PSI)
Fesco® Board
Fesco® Board HD
Invinsa™ Cover Board
Tapered ENRGY 3® Roof Insulation
Tapered Fesco® Board
JM Formaldehyde-free™JM Formaldehyde-free™ products

Product & Sales Information: (800) 654-3103